LOOKING FOR THIS CONNECTOR

[reom34]

HI SS FAMILY.

MY M34 NEED THE OTHER SIDE OF THIS CONNECTOR FOR CONTINUE THE REAR WIRE HARNESS.THE CONNECTOR SIZE IS THE SAME THAN 24 VOLTS REGULATOR
ANY IDEA? THE PRINCIPAL PARTS DEALERS DONT HAVE IT.

THANKS

 

[nickd]

I may have one for you. I will look tonite

 

[CGarbee]

If NickD doesn't have one for you, send a PM to "Tanner" and ask him about it (include any part numbers you have one the piece that you have) since he works for a company that supplies connectors and harness parts to the military and their vehicle suppliers...

 

[reom34]

THANKS FOR YOUR HELP BOYS

 

[m-35tom]

memphis equipment for m-36 new rear harness $72.21

 

[reom34]

THANKS M35TOM

 

[Recovry4x4]

I may also have that connector in an old generator to alternator harness. Let me know if you come up short.

 

[cranetruck]

What you need to mate that one is MS3106A22-23P plus a clamp MS3057-12A. The one in your hand should have the numbers 22-23S marked on the insert portion.

 

[reom34]

H3 7723308 AND AE 8701329 ARE THE NUMBERS FOR THE CONNECTOR IN THE PICTURES BUT I DONT KNOW THE NUMBER FOR THE CONNECTOR MISSING.

THANKS BOYS

 

[cranetruck]

H3 7723308 AND AE 8701329 ARE THE NUMBERS FOR THE CONNECTOR IN THE PICTURES BUT I DONT KNOW THE NUMBER FOR THE CONNECTOR MISSING.

THANKS BOYS

Okay, the MS connectors used by the military are standardized, have been for decades.
Judging from the size, the needed mating male connectors is MS3106A22-23P and if you want a cable clamp. its number is MS (or AN) 3057-12A.
The diameter of the insert should be 1.00 inches (25.4 mm) for this shell size.
Check for a number 22-23S on the insert (the image below is from a different insert I happen to have).

 

[reom34]

Thanks Crane. You are a genius.The connector put 22-23