M1008 Bed removal

[llong66]

Hello, I am going to be removing the bed from my M1008 to be able to replace the cab corners. I believe there are 8 bolts holding it on, The wireing harness, and gas cap connector. Is there any thing else I need to be awair of before I reove the bed?
Thanks!

Greg

 

[Recovry4x4]

There may be some ground straps floating around in there too.

 

[GM72K10]

vent tube from rear axle should be bolted to underside of bed

 

[timarr]

axle vent line is attached to the bottom.

 

[timarr]

REALLY! beat me by one minute! LOL!

 

[ralbelt]

Fuel fill neck has 3 0r 4 sheet metal screws securing it to the box.