M1008 Exhaust System Question

[Ianitor]

Hi, I’m actually looking for a new exhaust system for my M1008.
First of all I’m located in Europe so getting parts isn’t a easy task.
Finding exhaust systems for a 6.2 Diesel in general seems to be impossible.
A friendly helpful person now told me that the Chevrolet 350 Small block exhaust manifold flanges are the same as the 6.2 ones in size and position.
Can anyone confirm that for me?

I found a exhaust system on LMC trucks that says:
1973-89 Complete Performance Bolt-On Exhaust Systems Connect without welding.

They are made for literally all Chevy and GMC trucks except LMC has no K30.
Those systems are made for 350 small blocks.
Maybe anyone has further experience with those and can tell me if a 350 system would fit onto my 6.2 exhaust manifold and also my K30 frame (M1008 )

thanks for reading all that and I hope my English is understandable.

best regards

 

[vanaisa]

Maybe you find here something? Shop is in Europe and they are very helpful guys.

Exhaust System

kemper-parts.com

Same problem here, exept i need exhaust (front pipes) for 1009.

 

[Ianitor]

Thank you for your reply.
I know Kemper parts but they always don’t have the same parts in stock to get a complete exhaust system.
So i heard the 350 small Block has the same Manifold Size and positioning in terms of hole Diameter and Bolt pattern.
I just need some confirmation that it fits to order one of those exhaust systems from LMC.

exactly it’s that system I have found:

https://www.lmctruck.com/1973-87-chevy-gmc/cc-1973-87-complete-high-performance-bolt-on-exhaust-systems

 

[cucvrus]

Don’t they have pipe bending shops in Europe? I live out in the sticks and we can get mandrill bent exhaust pipes made for any vehicle. Good Luck. My Son made single exhaust on his CUCV. It sounded good and was half the cost. They were all parts made at an exhaust shop,

 

[Guyfang]

Good luck with that in Germany. Few and far between.