• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M1008 wiring help

Hammy

New member
31
0
0
Location
STL, MO
I've looked through the diagrams and I cant find this wire anywhere. the truck runs fine but seeing a random unhooked wire always concerns me. heres a picture below.

the wire comes out of the same harness as the glow plugs and alternator wires.

any help would be great thanks!
 

Attachments

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,177
113
Location
NY
:carnac: What color is it and what does it have on the end?
 

Hammy

New member
31
0
0
Location
STL, MO
it's black with a white stripe and it has a ring terminal on it. my first impression is that it's a ground of some kind. I tried to circle it in the photo.
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,177
113
Location
NY
On Schematic F-11 (Diagnostics Circuits) it is shown on the drivers side alternator ground stud.

You do not need it connected unless you have a military STE/ICE tester.
 

Attachments

Last edited:

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,774
232
63
Location
OKC, OK
Is that green wire attached to the frame or is it just looping back to the glow plug? Lighting makes it hard to tell.
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,177
113
Location
NY
It's looping.

I blew it up to look closer.
 

Hammy

New member
31
0
0
Location
STL, MO
thanks for the help! its always unsettling to find loose wires in the engine compartment. I'm glad it's nothing major though.
 
Top