- 1,229
- 53
- 48
- Location
- S.E. WI & S.E. TN, USA - Earth
I have been looking for a CX-13290 control cable (@15') for the radio installation in my M1009 and have hit a temporary roadblock.
I'm wondering if anyone has stripped any out of a 09 that they still have laying around in their garage. The cable runs between the radio shelf and the dashboard. It has a 6 pin connector on both ends (pin config is 6 around the edge, NOT 5 around the edge and 1 in the center).
The Control Cable feeds the Control Box located above the Remote Speaker mounted on the dashboard. This cable allows remote radio control for a RT-1439.
Any help with this would be greatly appreciated. I know that I saw a M1009 rebuild thread here and the harness was laying on the cab floor in the pictures. I can't find that thread.
I will post pictures of this install this weekend.
Bert
I'm wondering if anyone has stripped any out of a 09 that they still have laying around in their garage. The cable runs between the radio shelf and the dashboard. It has a 6 pin connector on both ends (pin config is 6 around the edge, NOT 5 around the edge and 1 in the center).
The Control Cable feeds the Control Box located above the Remote Speaker mounted on the dashboard. This cable allows remote radio control for a RT-1439.
Any help with this would be greatly appreciated. I know that I saw a M1009 rebuild thread here and the harness was laying on the cab floor in the pictures. I can't find that thread.
I will post pictures of this install this weekend.
Bert