M1009 instrument cluster flexible ribbon circuit board

[CycleJay]

Hi guys,

I would like to replace this part in my 1009.

Do any of you have a proper part number?
So I can get it either from an auto parts store (By order I suppose),
or one of the parts catalogs. (Like LMC Truck...)

Any information would be appreciated, thank you.

 

[M1031CMT]

LMC Catalog Page 118 for the Blazer: LMC Truck Parts - Page 118

Looks like part 38-8036

 

[dstang97]

LMC Catalog Page 118 for the Blazer: LMC Truck Parts - Page 118

Looks like part 38-8036

Will not work. It needs to be military.

 

[hndrsonj]

I don't think you'll find a new one. What's the matter with yours?

 

[M1031CMT]

Will not work. It needs to be military.

Yeah your right. Forgot about that. Too use to the civi trucks I have been working on lately.

 

[combatmech]

Eastern surplus might have them. Unless it's falling apart, it can be cleaned up and reused Jay. I have done it to both of the Oh-9's I have owned. There is a thread about the instrument cluster maintenance 'round here somewhere.
Check this one.... In post #7 is a link to yet another instrument cluster thread.
Good luck CJ
http://www.steelsoldiers.com/electrical/43351-cucv-instrument-cluster-repair.html

 

[combatmech]

And this one....http://www.steelsoldiers.com/cucv/46054-cucv-instrument-cluster-decoded.html
This is what got me through my repair and re-build

 

[CycleJay]

Hello hndrsonj,

I would like to get into it, so I can get some things working again.
But I have read and heard how brittle it might be..
So I was thinking, if I get in there at all, I might as well replace it,
so I do not have to worry, or just in case it is falling apart.
Just being preventative and thinking ahead, to be prepared for any trouble I may face.