TexasFJ
New member
- 15
- 0
- 0
- Location
- Fort Worth, Texas
I've stripped my M101A2 down to the bare components. I may cut the rear C channel and insert some oval 6" LED's, or more likely do some flush mounts, but before I do that I was thinking about retrofitting the military housings with some LED's.
I removed the wiring harness as it was a little shabby but I'm going to use the connectors at the rear, if I use the military lights, and then install new wire going forward. No brakes, just a flat 4 plug.
I've searched around on here and Google but am not getting anywhere. Trying to keep costs reasonable, 6" LEDs are about $18 each but I'd like to keep the military lights.. just with LEDs. Worst case I can get the 12V bulbs from the store and go that route as well.
Thoughts?
I removed the wiring harness as it was a little shabby but I'm going to use the connectors at the rear, if I use the military lights, and then install new wire going forward. No brakes, just a flat 4 plug.
I've searched around on here and Google but am not getting anywhere. Trying to keep costs reasonable, 6" LEDs are about $18 each but I'd like to keep the military lights.. just with LEDs. Worst case I can get the 12V bulbs from the store and go that route as well.
Thoughts?
Last edited: