gaunt1969
New member
- 98
- 0
- 0
- Location
- bessemer, al.
What shocks to use on a stock m1028 no lift?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M1028 Shocks
- Thread starter gaunt1969
- Start date
gaunt1969
New member
- 98
- 0
- 0
- Location
- bessemer, al.
does the same shocks for a k30 or c30 civi work?
- 34,012
- 1,808
- 113
- Location
- GA Mountains
84 K-30 will get you exactly what you need!
gaunt1969
New member
- 98
- 0
- 0
- Location
- bessemer, al.
thanks
niferous
Member
- 715
- 6
- 18
- Location
- Houston, TX
I"m saving up for a 1-1/2" or 2" lift kit for my M1009 but could use shocks now. If I buy some for my truck and tell them it's got the lift will they fit? Are they the stock sive shocks or just a little longer?
I plan on getting new rear springs and fronts so I probably won't be going with one of those generic kits with blocks in the back.
I plan on getting new rear springs and fronts so I probably won't be going with one of those generic kits with blocks in the back.
Last edited:
AJMBLAZER
New member
- 2,688
- 8
- 0
- Location
- Paducah, KY
gaunt, go to NAPA and get their truck shocks. Good stuff. $30 each or so but worth it.
nif, no, the best thing to do would be shop around for some el cheapo shocks to get you by. Really you want to measure after the lift is done. A lot of the lift maker's shocks are off. Not uncommon to have them be shorter than the lift springs can flex.
nif, no, the best thing to do would be shop around for some el cheapo shocks to get you by. Really you want to measure after the lift is done. A lot of the lift maker's shocks are off. Not uncommon to have them be shorter than the lift springs can flex.