SpecialK
New member
- 26
- 0
- 0
- Location
- Sioux Falls, SD
Greetings everyone.
I just recently converted my M1031 to 12 volts. I've had it over 4 years and the generator system was working perfect. Since the conversion the governor wont ramp up the motor. I verified the safety switches and made sure there were no loose wires. The only wires I disconnected were the ones from the 24v alternator. I'm wondering if any of you have come across this. Any tips would be greatly appreciated.
I just recently converted my M1031 to 12 volts. I've had it over 4 years and the generator system was working perfect. Since the conversion the governor wont ramp up the motor. I verified the safety switches and made sure there were no loose wires. The only wires I disconnected were the ones from the 24v alternator. I'm wondering if any of you have come across this. Any tips would be greatly appreciated.