M1078 12V Power Supply - Best Location?

[Phoenix77]

So the thread title pretty much says it all...

I'm looking to find a good, existing 12v circuit I could add a small fuse panel to that would power exterior LED floods, USB phone chargers etc.

I plan on splicing into the ignition power for the stereo and rear camera, but other than those, where is a good place to pull a constant 12v circuit?

Thanks.

 

[NDT]

From the 12 v power point at the PDP power distribution panel.

 

[Ronmar]

What NDT said, those power points are heavy gauge wire all the way back to alt and battery...

 

[Phoenix77]

Thanks guys

 

[spankybear]

Just remember to fuse whatever you are hooking up!

 

[Skeptical Kitty]

From the 12 v power point at the PDP power distribution panel.

Does anyone know what the bolt size and thread pitch is if the 24v, 12v and GRND main tie in points are?

 

[Ronmar]

On the A0, I think the ground is 1/4-28, and the 12 and 24 are 5/16-??(forget the pitch)...

 

[coachgeo]

Power Distribution Panel Main feeds (x1, x2) screw/bolts	Hardware store X1-24v &X2-12v	5/16th 18
Power Distribution Panel Main feed X3 screw/bolt	Hardware store X3-grnd	1/4 20

from the parts spread sheet