• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M1084A1 Refusing to Move

DFarnham

New member
10
8
3
Location
Marblemount, WA
I have a 2004 M1084A1 that has been sitting for about 4-5 months through the winter season. Engine cranked and idled at least once a month during that period. But, now when I engage the transmission (both drive and reverse) the truck refuses to move. Not sure if it is a transmission issue, or maybe the brakes seized (caged?) or other drivetrain components "broke" from the truck sitting static for a few months. Any troubleshooting ideas would be greatly appreciated! Thanks!!
 

NDT

Well-known member
Steel Soldiers Supporter
10,436
6,486
113
Location
Camp Wood/LC, TX
Probably your rear shoes have stuck to the drums. Climb up under the axles and see if the shoes retract when someone operates the button. If not try whacking the drums with the brakes released, (chock the wheels!!!). Might also try to break the shoes loose in 1st gear full throttle.
 

Ronmar

Well-known member
3,825
7,422
113
Location
Port angeles wa
Yea, probably rear shoes fused to drums. any transmission codes? Press both arrows together to enter diag mode. display will show D1 and 2 sets of numbers if any codes are stored or - - if no codes are stored. Press mode to step thru memory locations D1-D5. Press both arrows to exit or turn off the ign.

no codes, fill up the air tanks, chock the wheels, release the brakes and ring the drums with a hammer. Then select mode, 1st and depress the accelerator to get to peak torque…
 
Last edited:

aw113sgte

Well-known member
Steel Soldiers Supporter
630
939
93
Location
La Crosse, WI
Yea, probably rear shoes fused to drums. any transmission codes? Press both arrows together to enter diag mode. display will show D1 and 2 sets of numbers if any codes are stored or - - if no codes are stored. Press mode to step thru memory locations D1-D5. Press both arrows to exit or turn off the ign.

no codes, fill up the air tanks, chock the wheels, release the brakes and ring the drums with a hammer. Then select mode, 1st and depress the accelerator to get to peak torque…
Not sure if it's the same with these, but the fire dept trucks broke shoes free much easier in reverse.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks