kipman
Active member
- 2,514
- 15
- 38
- Location
- Lancaster Ohio
Anybody have a replacement part number for the electric fuel pump on a M151A1, my buddy's took a crap, found in a search Airtex 928, but it is not made anymore.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M151 A1 fuel pump
- Thread starter kipman
- Start date
kipman
Active member
- 2,514
- 15
- 38
- Location
- Lancaster Ohio
It looks like it could be the same one off a MEP 002A
Westech
CPL
- 6,104
- 208
- 63
- Location
- cow farts, Wisconsin
Kipp if you want a new new one let me now.. I can get them. They should be in the 125-225 range.+
Also has he taken the pump out? most of the time the power wire rots off. It is a Fixable thing.
Also has he taken the pump out? most of the time the power wire rots off. It is a Fixable thing.
Last edited:
kipman
Active member
- 2,514
- 15
- 38
- Location
- Lancaster Ohio
My buddy would go on that lower end, see what it would be and call me, thanks.
bullfrog1234
New member
- 110
- 1
- 0
- Location
- mississippi
the pumps are available through vendors. I replaced my a year ago with little trouble. Make sure they send the tool with it to tighten the nut. Grounding is a must or it wont work. I tried the in line jobs and those work, but you have to install a toggle switch and break the power source with a led wire from the battery and a 10 amp fuze.
Staffsargent
Member
- 220
- 1
- 18
- Location
- Blakeslee, PA
poppop
Well-known member
- 2,316
- 39
- 48
- Location
- Brooklet, Ga
If you don't care about it being orginal just put a 24 volt in line pump beside the seat like I did. It worked fine.
mikes47jeep
Member
- 369
- 13
- 18
- Location
- North East PA
i put an a2 pump on mine