M200 Trailer from Dayton OH to Clyde NC

[Chief_919]

M200 Trailer Dayton OH to Clyde NC

Just snagged an M200 with MICLIC at WPAFB, anyone interested in bringing it to NC for me, or just picking it up and hanging on to it until I can come grab it?

EUC should be clear in- whenever they do it.

 

[gimpyrobb]

Might be able to help. I am at that sight often. Swbradley1 might be able to store. I know you expressed interest for one of those hydraulic pumps Kipman had in the classifieds, did you ever work anything out? I could get one to your trailer. PM headed your way.

 

[deuceman51]

I have a MICLIC inert rocket for it if your interested.

 

[Chief_919]

I have a MICLIC inert rocket for it if your interested.

How much?

I have 4 Rockets, but I have 3 MICLIC's...

 

[Chief_919]

EUC finally cleared, Gimpy is going to pick it up for me but I will need it moved to Clyde NC. google says 408 miles.

If anyone wants to make some $$$ on the haul let me know, and I have a store full of surplus goodies for trade as well...

 

[treessw]

May be able to help. Doing a recovery for two other members and myself in the Indy area around the 2nd of march. I will be pulling a trailer so I may have some room to squeze the m200 on the back or front, I will make a measurement in the next day or so and see. Worst case, if I have the room in the bed of the truck, gimp might be able to load the m200 in the back of the bed with his wrecker? Gimp you still have a wrecker?

 

[gimpyrobb]

Still got it, but its in Petersburg Ky.

 

[treessw]

Still got it, but its in Petersburg Ky.

You have anyone in the area available to lift? The trailer is going to be tight, so I was thinking we may be able to get it in the bed of the truck? Got any thoughts or ideas?

 

[gimpyrobb]

What truck, these are not small trailers.

 

[treessw]

I was going to do recovery this time with a trailer and truck. Truck is a one ton dump truck with a nine foot bed length. What is the width on these with the dual's removed? Thinking it could be put in the back of the truck and boomed down

 

[jaxsof]

If it has duals, youre gonna have to take off one of the outers, singles fit tight. I know 1 will fit in the bed of an 813, should fit in a deuce.

 

[treessw]

If it has duals, youre gonna have to take off one of the outers, singles fit tight. I know 1 will fit in the bed of an 813, should fit in a deuce.

Thats the idea. I will make a measurement based on that thanks for the heads up

 

[Chief_919]

If you can grab it that would be great. Keep in mind that it has a MICLIC on it, so it is a bit taller.

 

[doghead]

M58 MICLIC - Wikipedia, the free encyclopedia

 

[treessw]

Interesting!!!!

 

[treessw]

If you can grab it that would be great. Keep in mind that it has a MICLIC on it, so it is a bit taller.

As long as I am some where in the 13'6 to 14' height range I believe I will be OK Either way, just adapt and overcome

 

[swbradley1]

If it ends up at my place I can load it with the hoe.

 

[Chief_919]

If it ends up at my place I can load it with the hoe.

I think Gimpy said that is the plan, so let me know whatever I end up owing ya if it all works out.


PM me your address as well, so i can be ready to pop it up on uship and get quotes if need be.

Thanks!

 

[gimpyrobb]

Tinsley, are you anywhere near Nashville? I can get it there this weekend(Sat) if anyone can hold it.

 

[treessw]

Tinsley, are you anywhere near Nashville? I can get it there this weekend(Sat) if anyone can hold it.

Yeah!!! Where you gonna be or where are you going? I can for sure hold it or meet you or what ever. What are you doing down in this neck of the woods?