I've come across the first item I can't truely figure out and little help in the manuals or online. Truck was fine, suddenly there is no pressure to keep the shifter centered in neutral from 4th&5th. There is pressure from reverse and 1st just fine. I pulled the cover and do not see any issues. Any insight is much appreciated as this thing sucks to drive now being I constantly hit 5th rather than 2nd.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M35a2c shifter trouble/sloppy
- Thread starter Msw210
- Start date
davidb56
Well-known member
- 1,020
- 1,237
- 113
- Location
- Bonners Ferry Idaho
when you pulled the cover, were the 3 popper balls and springs in place in the cover?
davidb56
Well-known member
- 1,020
- 1,237
- 113
- Location
- Bonners Ferry Idaho
TM 9-2520-246-34..........fig 3-43. this is just a guess.
All the springs and balls were in place, I was originally guessing on a broken spring. From what a could tell in the TM, it doesn't have anything to do with the ball or cup so I didn't remove that. The interlock plate is spring loaded in 1 direction, which is giving the return out of 1st. I don't see anything that uses that interlock to return to center from the other direction.
Rigged up a new boot, not the problem either...I'm out of ideas
Oerthedge21
Member
- 250
- 20
- 18
- Location
- Northford CT
If it's no longer holding position the detents are the only thing left that should be causing the issue. If not a broken spring then many the detent ball shattered or broke somehow, or the notches on the shift rails chipped or the rail itself snapped, if it were mine if pull the top cover apart and inspect the rails and detent system and go from there
I've been driven crazy about this over the past few days. I couldn't find a single thing wrong with this transmission. I can only believe the dry rotted boot was pulling my shifter over until it split. Watching a few videos of others driving has confirmed that my transmission is now acting normal. I drove it today with no issues, slow and steady. Thank you all for your help.
Oerthedge21
Member
- 250
- 20
- 18
- Location
- Northford CT
What a strange issue, shifted boot is the last thing I ever would've seriously considered. Glad to see it was something easy for once
nathantc409
Member
- 37
- 36
- 18
- Location
- Lumberton Texas
ok, so is there supposed to be spring resistance going from center to the right (4th/5th) like there is going from center to the left (1st/reverse)?
- 6,986
- 2,522
- 113
- Location
- Montevideo/Uruguay
nathantc409
Member
- 37
- 36
- 18
- Location
- Lumberton Texas
thanks
- 6,555
- 13,939
- 113
- Location
- Hawthorne, NV.
When I started reading this post and thinking of all the possibilities that could cause this problem. The shifter boot never once crossed my mind. Yea glad it was an easy fix.