M931 tractor with 1600r20?

[Norinco666]

Will 1600r20 fit on the m931 with no issues? Would like to see
Pics also thanks!

 

[simp5782]

Will 1600r20 fit on the m931 with no issues? Would like to see
Pics also thanks!

Member 98g has pics of them on a 818. The same truck basically.

 

[98G]

M818 on 16.00s

 

[98G]

M925 on 16.00s

 

[98G]

Fitment issues -

HEMTT rims are required on the front axle on 939series trucks to prevent rubbing at full turn.

It's possible(but not easy) to articulate the suspension enough to contact the bed. Obviously not an issue on the truck tractors.

 

[kubotaman]

Are you going to be towing anything with your tractor? The standard 1400s on M931A1/A2s already raise the 5th wheel height up quite high, 1600s are even worse.

 

[98G]

Are you going to be towing anything with your tractor? The standard 1400s on M931A1/A2s already raise the 5th wheel height up quite high, 1600s are even worse.

You mean like this?

 

[Norinco666]

Thanks for all the replies guys i guess i will stick with 1400s i mostly offroad with this thing and just tear **** up ��

 

[simp5782]

Thanks for all the replies guys i guess i will stick with 1400s i mostly offroad with this thing and just tear **** up ��View attachment 749338

Take care of your 1400s. They are getting harder to find an those that do have them charge a good bit for them. Plus with 1600s offroad you would not be able to turn the tires over hardly if you got into any sloppy mud. They would gum up really easy. 16s are really close together.

 

[kubotaman]

You mean like this?

View attachment 749303

Military trailers seem to work fine with it, it was towing civilian trailers with an M931A2 that caused us problems