Max rpm , 10 kw engine

[metalworker393]

So, im thinking about another conversion. What is the max continuos rpm of the 10kw engines ?
Years ago i bought a 400hz unit to repower an 003a . I know they are built to run at 1800 rpm for generating power. But, what could they run at for lets say , 3-4 hours ? Could they run at 3600 , or is there a lower rpm limit ? Thinking about an engine from either a 112a or an 813a. Anybody know ? Thanks METALWORKER393

 

[profo]

Any thing of 2k rpm they will start puking oil out the vent! Been there done that!

 

[DieselAddict]

If you go back to the manufacturer they are listed up to 3600 RPM for the engines in the 803/813 units.

https://www.listerpetter.com/engines/lpw4/

 

[profo]

Not the same engine the mep003 was a AIR Cooled onan engine.

If you go back to the manufacturer they are listed up to 3600 RPM for the engines in the 803/813 units.

https://www.listerpetter.com/engines/lpw4/

 

[DieselAddict]

Not the same engine the mep003 was a AIR Cooled onan engine.

I was going by this in the OP:

Thinking about an engine from either a 112a or an 813a. Anybody know ? Thanks METALWORKER393