trucker135
New member
- 1
- 0
- 0
- Location
- michigan
Need help in finding a replacement voltage regulator for my Deutz Diesel motor. The diesel is a KHD model F1L208F service code 7850866. The diesel is installed in a military compressor MC2A with the military part number 4191201. The physical part is a Ducati Energie regulator with the part number stamped in the housing 343520. There is a push on connector with 6 male flat pin connectors labeled G G R B L C. The G G R lead to the alternator. The B connects to the + battery. The L is open. The C leads to a power on switch.
Would like to replace this with a standard automotive type regulator if possible. However, I do not know how the connections lead to the alternator except the R appears to be the output to the battery. Need to know which to the two G’s is the Field and which is the Stator.
The TO 34Y1-87-61 manual does not provide details for alternator connections. Is there any detail info about the alternator or is there any way in testing the leads to determine connectivity?
Would like to replace this with a standard automotive type regulator if possible. However, I do not know how the connections lead to the alternator except the R appears to be the output to the battery. Need to know which to the two G’s is the Field and which is the Stator.
The TO 34Y1-87-61 manual does not provide details for alternator connections. Is there any detail info about the alternator or is there any way in testing the leads to determine connectivity?