• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

MEP-016E Fuel Usage

I

Isaac-1

Well-known member
1,970
50
48
Location
SW, Louisiana
Yanmar rates the L-100 engine used on the MEP-016e at around .58 -.66 GPH at full load and around .34-.38 GPH at half load depending on the exact version of the L100 (L100A, L100AE, L100V, etc.) model and source of information. In the commercial world these are usually mated with 6,000 - 6,500 watt generator ends. So turning a MEP-016 series generator end at 3,000 watts output one would expect fuel consumption to be around the half load .34 GPH number (discounting extra friction loss from the relatively oversized generator end). I have seen the .38 or .39 GPH mentioned for the L70 powered MEP-016d, so this seems to be a reasonable guess.

Ike
 
Last edited:
You must log in or register to reply here.
110,839members
165,292threads
2,325,703posts
1,510online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks