Greetings,
I recently acquired an MEP 803a and am in the process of "going through it," I am replacing the primary fuel/water separator and the secondary fuel filters as well as the oil filter. After reviewing the owner's manual and TM there was no reference in regard to the fuel/water separator replacement. I am baffled as to how to remove the primary fuel/water separator.
I used a strap wrench on it and there was no movement. I also used an adjustable wrench to turn the bottom where the fuel drain is and it was just as resistant.
Am I missing something? It can't be this difficult. Any recommendations? I hope I am in the right place on the forum.
Thanks!!
I recently acquired an MEP 803a and am in the process of "going through it," I am replacing the primary fuel/water separator and the secondary fuel filters as well as the oil filter. After reviewing the owner's manual and TM there was no reference in regard to the fuel/water separator replacement. I am baffled as to how to remove the primary fuel/water separator.
I used a strap wrench on it and there was no movement. I also used an adjustable wrench to turn the bottom where the fuel drain is and it was just as resistant.
Am I missing something? It can't be this difficult. Any recommendations? I hope I am in the right place on the forum.
Thanks!!