Hummingbird
New member
- 12
- 0
- 1
- Location
- North Florida
Got this generator last year from an auction and haven't had a lot of time to tinker with it. It is a 1999 machine with 1500 hrs on the gauge, no reset.
Last year I put new oil in it, oil filter, new batteries, and installed the fuse for the quad winding. Used the dead crank to turn the engine over, no problem.
This week I replaced the S1 Master Switch with a 75902LV purchased awhile back on ebay and added some water to the coolant system with intentions to flush.
While adding water it was pouring out of the front hub on the water pump, anyone have any experience with the ebay water pumps?
After this I decided to spin the engine, when I bumped the dead crank switch it began cranking and wouldn't stop until I disconnected the negative battery terminal.
I have some schematics printed and am currently studying. Any help would be much appreciated!
Last year I put new oil in it, oil filter, new batteries, and installed the fuse for the quad winding. Used the dead crank to turn the engine over, no problem.
This week I replaced the S1 Master Switch with a 75902LV purchased awhile back on ebay and added some water to the coolant system with intentions to flush.
While adding water it was pouring out of the front hub on the water pump, anyone have any experience with the ebay water pumps?
After this I decided to spin the engine, when I bumped the dead crank switch it began cranking and wouldn't stop until I disconnected the negative battery terminal.
I have some schematics printed and am currently studying. Any help would be much appreciated!