MEP-804A Under Voltage on startup

[Baconcake]

I'm a newbee here, but I love all the great information provided. I got my MEP-804a from auction and it's running great. I just ran my whole compound and it only registered 65%.

But, every time I startup I get the "Under Voltage" error light. It goes out after pressing the reset lamps button. I'm just wondering if I should be concerned.

I wasn't sure the best way to get the power out, so I added a "Temporary Outlet Panel" with some conduit from Home Depot. Now I can plug in 50amp or 30amp cables and power anything.

 

[Guyfang]

It could be the fault indicator. If you have access to another, I would swap them to see if that's it. Happened all the time with the older gen sets, and every now and then to the TQG's

 

[Light in the Dark]

I have a used (but tested) fault panel out of an 802/803 if you find yourself needing one.

 

[Baconcake]

Thanks for the reply's, but since it only faults on startup I think I'm going to wing it for now.