Matt Kahle
New member
- 165
- 1
- 0
- Location
- germantown NY
Okay I started working on the m1009 recently. I have quite a few electrical problems especially with the charging system again. For now I'm going to ask about this ground wire I found on the terminal boards. From what I have seen on the alternator wire diagram it's a "suppressor". I was cleaning the wire ends on the terminals and I found the crossing wire from pos to neg that was melted. I wanted to just make a new one, but it seems under all the electrical tape I found some orange little tap. My thoughts were maybe its a good idea I ask before replacing it with something that won't work. So could some one tell me what this "suppressor" is?