wilco
Member
- 94
- 0
- 8
- Location
- newross, in
Almost done!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Muffler madness
- Thread starter wilco
- Start date
GunnersHusband
Member
- 232
- 0
- 16
- Location
- Sault Sainte Marie, MI
holy poop that's big....... let us know how that works out for you. I'm considering that upgrade myself.
Capt.Marion
Active member
- 1,811
- 15
- 38
- Location
- Atlanta, GA
Re: RE: Muffler madness
Mufflers are nice. You can have conversations in the cab whilst driving... and even going up a grade.GunnersHusband said:
5tonpuller
Member
- 572
- 24
- 18
- Location
- Thompson, Pa
RE: Re: RE: Muffler madness
Mine is all done. I need to get my pictures together to post. I set mine up to ether use the stock stack OR the muffler. I think you will like it.
Mine is all done. I need to get my pictures together to post. I set mine up to ether use the stock stack OR the muffler. I think you will like it.
appnut1
New member
- 137
- 0
- 0
- Location
- Winter Springs Florida
RE: Re: RE: Muffler madness
I did the NAPA thing on my duece it was the best thing ever
I did the NAPA thing on my duece it was the best thing ever
m52a2
New member
- 89
- 0
- 0
- Location
- Jackson, Michigan, USA
The muffler is a great idea, I used a racing muffler from Jegs high performance to keep is low profile. just be sure to use high temp paint ! what you see is the brown promer not rust. Now I figure to let the paint I used burn off and then apply the high temp kind.
Attachments
wilco
Member
- 94
- 0
- 8
- Location
- newross, in
DONE
DONE
DONE
Attachments
wilco
Member
- 94
- 0
- 8
- Location
- newross, in
DONE
DONE
DONE
Attachments
sermis
Active member
- 1,844
- 17
- 38
- Location
- Temple, TX
What are the pipes plumed in to the air intake?
Attachments
m52a2
New member
- 89
- 0
- 0
- Location
- Jackson, Michigan, USA
RE: I just finished mine!!!
to address fhoto of m52a2 muffler & fording kit stac: As part of the fording kit on the 5 ton multifuel, the small steel virtical pipe next to the air cleaner stack is air system vent from the firewall manifold kept seperate from the air cleaner stack, also there are 2 flexable hoses, one from the compressor and one from engine crankase vent that tie in to the air cleaner stac.
to address fhoto of m52a2 muffler & fording kit stac: As part of the fording kit on the 5 ton multifuel, the small steel virtical pipe next to the air cleaner stack is air system vent from the firewall manifold kept seperate from the air cleaner stack, also there are 2 flexable hoses, one from the compressor and one from engine crankase vent that tie in to the air cleaner stac.
FreightTrain
Banned
- 2,730
- 13
- 0
- Location
- Gadsden,Al
RE: I just finished mine!!!
same for a deuce.One rubber hose hooked to the slobber tube that dumps out under the shroom on the rubber intake snorkle,another rubber hose from teh compressor to teh boss on the filter can then some misc junk to mount it to the stack and to run air to the bell housing.
same for a deuce.One rubber hose hooked to the slobber tube that dumps out under the shroom on the rubber intake snorkle,another rubber hose from teh compressor to teh boss on the filter can then some misc junk to mount it to the stack and to run air to the bell housing.
dk8019
Active member
- 802
- 55
- 28
- Location
- Lovettsville, VA
Did the muffler mod on my new M109A3 today. As you can see I decided to go tall on this one, I want that exhaust up near the van top. We'll see how quite she is this evening.
Attachments
- 5,580
- 349
- 83
- Location
- DESOTO, KANSAS
What is the NAPA# for the muffler? Thanks
Somemedic
Member
- 531
- 0
- 16
- Location
- Hobart, IN
Wilco, Im assuming thats a NAPA muffler... What is the number so I can take it to the counter and order one?
5tonpuller
Member
- 572
- 24
- 18
- Location
- Thompson, Pa
Mine swings both ways. Stack or muffler.
Attachments
saquishmike
Member
- 126
- 0
- 16
- Location
- Marshfield mass
Has anyone who has put a muffler on a deuce seen a drop in power?
- 121
- 0
- 16
- Location
- Birmingham/Alabama
Does the increased back pressure from a muffler hurt the turbo?
GoHot229
Member
- 908
- 16
- 18
- Location
- Cason Old Field NC. 704-851-9953
I used that same muffler and the 'whistle' comes through plenty good enough to be heard, I dont think I'd want a Duce to be unmuffeled, as it is my next step is to Tractor Supply for some of the rubber flooring mats they use in horse trailers and will cut to fit the floor and firewall to sound deaden the noise factor.
LanceRobson
Well-known member
- 1,638
- 206
- 63
- Location
- Pinnacle, Stokes County, NC
Use Walker #21470 or equivalent. I believe they are all straight trough air flow so there is no power loss.
I just ordered the Walker one and will have it in a few days. I'll post back then.
Lance