Need help finding correct wiring pins

[Wingnut13]

Hey all,
I’m installing my winch, here is a couple wiring blocks I need to repin due to corrosion. Just touch a couple of these and they break off. I’m not familiar with this style pins/block. The connector says Burns? Anybody order pins for these? Have any more intell?

 

[GeneralDisorder]

Where is this connector located and on what model/year? And what is your serial number? I'll take a look at the parts manual.....

 

[Wingnut13]

Well it’s the winch harness. So it plugs in under the dashboard I believe with the white connector blocks, those are in good shape. But these black blocks would terminate somewhere under the fuse panel, where? I don’t know yet.

M1078A1
A-T021157EFHL , not too sure on those last two letters

Here is a picture of both black connector blocks

 

[GeneralDisorder]

Measure the pins, but these appear to be some derivative or custom size of a standard 0.093" pin Molex connector..... possibly using the same pins. Measure them and use a hollow tube pin extractor to get one free and compare:

https://www.molex.com/molex/products/family/standard_093?parentKey=power_connectors

All else fails - find out where they go, cut them off and replace with Deutsch connectors.

 

[Wingnut13]

Excellent! Copy all, will do. Thanks for the quick reply.