Need help locating a thread on a M998 upgrade.

[kcpstudio]

Hey guys. A couple days ago I saw a thread where a M998 owner had did a upgrade conversion to an A1? Something like that. Anyway, what caught my eye was he lined the bed of the truck with green insulation board like the tunnel insulation board. He showed fasteners he used as well as the hold down clamps etc. he did other things to the truck as well that I wanted to go back and read the entire thread. I thought I book marked it but apparently I didn’t. If you guys are familiar with the post, please comment. Because I’ve spent a couple hours already trying to locate it.

thanks

 

[kcpstudio]

It only took a gazillion hours but I tracked down the thread. Turns out... it was over at the g503 forum. Lol Not being able to locate that thread, was like an itch I couldn’t scratch. Lol

 

[Wire Fox]

It only took a gazillion hours but I tracked down the thread. Turns out... it was over at the g503 forum. Lol Not being able to locate that thread, was like an itch I couldn’t scratch. Lol

Well dang, you go and find this thread and you don't even share the link to what you found after getting our interest up?

 

[kcpstudio]

Oh snap. Sorry bro. I never even though about that. Here’s the link. I was interested in flooring my bed but realized this gent’s truck is a slant back. I’m not sure how tunnel material on an open bed would handle the elements. I was also interested in the water jet cut parts he did for his VIC setup.

https://forums.g503.com/viewtopic.php?f=63&t=293724

 

[kcpstudio]

not sure if my last post tagged you or not. Sorry again for not originally including a link to the post I was searching. It’s an interesting read. There were a couple things he did that got me thinking about how I want to tackle my VIC setup but also my truck’s bed. Here’s that link again:

https://forums.g503.com/viewtopic.php?f=63&t=293724

Well dang, you go and find this thread and you don't even share the link to what you found after getting our interest up?

 

[Wire Fox]

Thanks! I was just enjoying giving you a hard time, but I'll definitely go check that out here shortly. I always love reading about conversion projects, as they usually have some of the best insights.

 

[kcpstudio]

ha ha.....

Thanks! I was just enjoying giving you a hard time, but I'll definitely go check that out here shortly. I always love reading about conversion projects, as they usually have some of the best insights.