AlexFolino
New member
- 60
- 0
- 0
- Location
- Pittsburgh Pennsylvania
Well the CUCV M1008 i have is finally legal. Now i need to get the charging system correct. I bought 2 new batteries for it however the truck will be dead after its started(alternators and or wiring). The problem is the truck is an electrical mess going to the alternators. I have a big red wire going to the drivers side alternator chopped off and a little black/white stripe wire going towards it broken off. Now obviously i can tell the black wire goes to this alternator because the old piece is still connected however the thick red wire doesn seem to have a home? On the back off this alternator theres like a black rubber boot that connects on the alternator where as the passenger side doesnt have one? Id like some pictures of the back off the alternators on your guys setups so i can see what im working with here... Im curious is its more a wiring issue than just bad alternators. Im only putting out battery voltage out of each alternator. After the truck is slow charged, it will run but if it sits more than an hour after being shut off its stone dead.