FridgeBrilliance
New member
- 69
- 0
- 0
- Location
- Tacoma, Washington
Ok, so things have gotten to the point with the new sheet metal dash where all I have to do is figure out what to do with the gen lights. I almost screwed the pooch and committed to converting to 12V just because of this, then the poltergeist that is doghead invaded my dreams and admonished me and mandated that I find a better solution.
So, what I would like to do, since they have to remain indandescent (everything else will go to LED if that is possible, IIRC only the gen 1 and gen 2 light must be) is use something like this:
2905
Problem is, I have no idea what to search for, or if there is even anything like this that will hold the correct bulb. Any ideas?
So, what I would like to do, since they have to remain indandescent (everything else will go to LED if that is possible, IIRC only the gen 1 and gen 2 light must be) is use something like this:
2905
Problem is, I have no idea what to search for, or if there is even anything like this that will hold the correct bulb. Any ideas?