freecr
Member
- 45
- 1
- 8
- Location
- Rochester/MN
Hi all,
I've been just a casual watcher/reader for awhile but I believe this is my first post. I originally became interested around the time I purchased a little Mep-016D generator. And again with much interest a few months back with the EPA and surplus vehicle issue. Seems to have worked out. Just today I won the bid on a S+S '94 M1079 LMTV van. According to the inspection It requires a jump to start. I'll be arriving to SEA, taxi or shuttle, or possibly catch a ride from my sister to DRMO in Ft Lewis-McChord and somehow (hopefully) driving it back to Rochester MN. Will the DRMO staff provide a jump (possibly a fee involved) or do I need to purchase... transport there... and install batteries on site? I'll make some calls tomorrow, I just was hoping to get a head start. I was hoping for a jump, then drive to a auto store or Walmart etc and then swap batteries. Possibly the drive to auto store would start to recover batteries. I can dream, right?
2nd set of questions: If I take the shuttle from SEA airport to Ft L-M, how far to the DRMO? Walk or taxi from there? is there an auto parts store near by? Anybody know the lay of the land?
3rd set: Are the battery clamps on the truck of common size? Do the leads possibly end in terminals that you just feed a bolt through and attach to clamp that way? It would really suck to cart batteries there and they not fit? I have no need to "keep it military" so any brand of battery is "on the table" as long as it fits in the box and the clamps fit on. Any suggestions would be great but I would be equally interested in what to avoid. I hope to avoid brand loyalty wars though.
Freecr
I've been just a casual watcher/reader for awhile but I believe this is my first post. I originally became interested around the time I purchased a little Mep-016D generator. And again with much interest a few months back with the EPA and surplus vehicle issue. Seems to have worked out. Just today I won the bid on a S+S '94 M1079 LMTV van. According to the inspection It requires a jump to start. I'll be arriving to SEA, taxi or shuttle, or possibly catch a ride from my sister to DRMO in Ft Lewis-McChord and somehow (hopefully) driving it back to Rochester MN. Will the DRMO staff provide a jump (possibly a fee involved) or do I need to purchase... transport there... and install batteries on site? I'll make some calls tomorrow, I just was hoping to get a head start. I was hoping for a jump, then drive to a auto store or Walmart etc and then swap batteries. Possibly the drive to auto store would start to recover batteries. I can dream, right?
2nd set of questions: If I take the shuttle from SEA airport to Ft L-M, how far to the DRMO? Walk or taxi from there? is there an auto parts store near by? Anybody know the lay of the land?
3rd set: Are the battery clamps on the truck of common size? Do the leads possibly end in terminals that you just feed a bolt through and attach to clamp that way? It would really suck to cart batteries there and they not fit? I have no need to "keep it military" so any brand of battery is "on the table" as long as it fits in the box and the clamps fit on. Any suggestions would be great but I would be equally interested in what to avoid. I hope to avoid brand loyalty wars though.
Freecr