New rear harness

[ldmack3]

Got my front harness all installed and received the rear. Got it unhooked but I am stuck trying to get the old one out as its hanging up between the air tanks and the frame. I can pull it back and forth a few inches but that's it.

If there is a clamp holding it I'll have to pull the tanks. May have to anyway to get the new connector though that area.

Anyone have experience on this and/or advice?

 

[NY Tom]

If I remember correctly there is a clamp behind the air tanks.

I had the tanks out over the last year. Was doing the brake line that runs there which also has inaccessible clamps on it.

 

[ldmack3]

Ok so I soaked the hardware holding the tanks in, was rusted pretty bad. Hit them again later and then tomorrow work on getting them loose.
Thanks for the info!

 

[NY Tom]

It was a pain to do it but worth it. I painted the tanks and everything under there inside that frame section.

 

[davidb56]

It was a pain to do it but worth it. I painted the tanks and everything under there inside that frame section.

I keep mine coated with 4 inches of mud to protect them.

 

[ldmack3]

Well if I'm taking the tanks out anyway and I have a single circuit brake system... (Aww crap)