coachgeo
Well-known member
- 5,145
- 3,461
- 113
- Location
- North of Cincy OH
is this a new style fan clutch? Part number 12421971
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
New style fan clutch
- Thread starter coachgeo
- Start date
Ronmar
Well-known member
- 3,832
- 7,449
- 113
- Location
- Port angeles wa
Yes, new style has studs old style does not. You also need the new style fan to go with this... The old style fan will not match the stud placement...
Last edited:
- 6,426
- 4,985
- 113
- Location
- Ft. Lauderdale, Florida
Well, Now that is definitive!
coachgeo
Well-known member
- 5,145
- 3,461
- 113
- Location
- North of Cincy OH
would one with a connection to a machinist be able to cut center out of old fan..... weld in new center and drill new holes to match? Just wondering if 150 bucks was worth this used one off a c7 to have on hand.
Ronmar
Well-known member
- 3,832
- 7,449
- 113
- Location
- Port angeles wa
Well anything is possible with the right tools and talent. Since the plastic fan is molded around the center plate you would have to watch the heat applied...
- 1,813
- 1,518
- 113
- Location
- Orlando, FL
Your old fan has a center? The new fan is the one with the steel center plate. The old one is the one with the big hole through it, and the rubber grommets that many people don't like.
- 1,200
- 457
- 83
- Location
- Spartanburg,SC
I had a friend of mine machine a plate that bolted to the old fan and had new holes for the clutch. No welding needed.