New to me M38A1 ! New finished pics up!!

[exhogflyer]

Picked up a nice clean M38A1 on Monday. Lots of little things to do to bring her back to her former glory, this hobby is VERY addicting!

 

[SturmTyger380]

That's a nice one! I like the mod for the passenger side mirror. How is the bracket mounted to the windshield frame?

 

[DeetFreek]

Nice find! It really looks good from the pic, but I know it's not always the case lol.

 

[exhogflyer]

She's actually in very nice shape. NO rust, but mechanically neglected from sitting. Here's what's going on: 2 new batteries and correct hold downs, complete rebuild of the entire brake system, carburetor rebuild, distributor overhaul, and fixing all the evils people have done to the wiring/lighting system. I'm a mechanic by trade so it's not a huge job for me and I actually enjoy bringing this piece of history back to life. We also have a lot of cleaning to do but I have all winter. I'll post photos.

 

[SCM35A2]

Very nice!

 

[exhogflyer]

Ok, I've started on the brake rebuild, and I've also rebuilt the carburetor. Carb was full of crud, and wheel cylinders seeped out fluid and destroyed the shoes. New lines and hoses too!

 

[exhogflyer]

Ok, brake system overhaul is done, now I'm replacing the rear main seal which was completely worn. Bearing and crankshaft journals looked good, not too much crud in the pan.

 

[Saberr]

Wow brake rebuild and main seals change, your jumping in feet first into the not so fun stuff. Good job.

 

[exhogflyer]

Wow brake rebuild and main seals change, your jumping in feet first into the not so fun stuff. Good job.

I want to get the mechanicals done before I put it in the garage for the winter, then I will concentrate on the cosmetics/ wiring.

 

[exhogflyer]

Well I got all the mechanicals finished, and it was in it's first parade ! Also installed the Vertronix pointless system and it was a nice upgrade. ( yes I'm keeping the points plate in case down the road I sell it). Also was able
to get the correct radios which I'll install over the winter along with all new seat cushions.

 

[SturmTyger380]

Which RT radio transmitter did you find? The RT-68 was the infantry band. The RT-67 was artillery. And, RT-66 was armor.

 

[exhogflyer]

Which RT radio transmitter did you find? The RT-68 was the infantry band. The RT-67 was artillery. And, RT-66 was armor.

I went with the RT 66 because I got it cheap. Like I said it's just for visuals.

 

[exhogflyer]

 

[exhogflyer]

And put my new seat covers/cushions on today
MERRY CHRISTMAS ALL !!

 

[exhogflyer]

Ok, update on the Jeep's progress: finished mechanicals before winter, over the winter started the cosmetics. I repainted the interior, recovered and installed seats. Also installed the radios and mount, I did not actually hook them up electrically as I don't intend to use them. Also cleaned the top from about 50 years of grime. Finally, I correctly stenciled the markings, wired up the lights so all work correctly, and aligned the front end. Hopefully we'll get to enjoy it!

 

[exhogflyer]

And finally finished!

 

[Maverick1701]

Also installed the Vertronix pointless system and it was a nice upgrade.

since it has been a few months, what are you thoughts on the Vertronix pointless setup? How was the install?
I have been considering installing it on my Jeep.

 

[exhogflyer]

Def worth the money! No need to ever re adjust points, and it always runs smooth. One less maintenance item, only caveat is make sure ignition is always OFF when its not running.