New VR could eliminate the curse of a bad quad winding.

[DCB6]

MEP-802A & MEP-803A Voltage Regulators
Replaces TRC 19580 88-21063 6110-01-363-0492

Features include:
· Replacement for your defective or missing Voltage Regulator... or to have a spare on hand
· Works in generators that have defective Quad Windings!
· Supports the 802/803's Field Flashing operation
· Input and output fuse protection
· Works with or without the "Fuse Mod" (Fuse Mod is not needed)
· Virtually all components can be replaced for maintainability
· Includes new pre-wired front panel voltage adjustment potentiometer
· New mounting hardware, wire labels zip ties & instructions included for installation
· 1 year warranty

 

[DCB6]

MEP-802A & MEP-803A Voltage Regulators
Replaces TRC 19580 88-21063 6110-01-363-0492

Features include:
· Replacement for your defective or missing Voltage Regulator... or to have a spare on hand
· Works in generators that have defective Quad Windings!
· Supports the 802/803's Field Flashing operation
· Input and output fuse protection
· Works with or without the "Fuse Mod" (Fuse Mod is not needed)
· Virtually all components can be replaced for maintainability
· Includes new pre-wired front panel voltage adjustment potentiometer
· New mounting hardware, wire labels zip ties & instructions included for installation
· 1 year warranty

 

[DCB6]

Sorry for the duplicate message above.....

I wanted to say that, I like other members here have had the frustrating experience of purchasing a 5 or 10 kW unit only to learn the quad windings were toast. If we could have had this option sooner, it would have saved a lot of units from becoming parts machines. For the price, It's cheap insurance and the extra features are well thought out.

 

[Scoobyshep]

I didnt think these would run with a blown quad winding.

 

[Guyfang]

I didnt think these would run with a blown quad winding.

Kurt has come up with a replacement VR that WILL run with the quad winding unserviceable. Check it out. If I had a 802A or 803A, I KNOW, I would be putting one in my set. I have never liked the Quad set up, and that's been one of the biggest problem areas of the TQG.

 

[Scoobyshep]

Kurt has come up with a replacement VR that WILL run with the quad winding unserviceable. Check it out. If I had a 802A or 803A, I KNOW, I would be putting one in my set. I have never liked the Quad set up, and that's been one of the biggest problem areas of the TQG.

If it will physically work, then it will be a cool thing to see.

 

[kloppk]

If it will physically work, then it will be a cool thing to see.

It bolts up in the exact same spot as the stock VR.
Pictures of one installed are here ---> Replacement VR

 

[Scoobyshep]

It bolts up in the exact same spot as the stock VR.
Pictures of it installed are here ---> Replacement VR

Looks neat, Do you have a solution for a 005 by any chance?

 

[kloppk]

Looks neat, Do you have a solution for a 005 by any chance?

Sorry.... haven't tackled that yet.

 

[Scoobyshep]

Sorry.... haven't tackled that yet.

No worries, let me know if you do.

Sent from my SM-G950U using Tapatalk

 

[Light in the Dark]

Kurt has come up with a replacement VR that WILL run with the quad winding unserviceable. Check it out. If I had a 802A or 803A, I KNOW, I would be putting one in my set. I have never liked the Quad set up, and that's been one of the biggest problem areas of the TQG.

That is slick. Good work Kurt.