Greetings all! I wanted to share with Steel Soldiers my first (probably only) big MV. It is one heack of a rig. I never realized how much you can see where the CCKW like style and the "newer" inventions at that time that would go into the M35 series in this one truck. I have to do a little steel removal from the rear, front bumper (lack of) install a few parts from a donor vehicle but I know it will take the one thing most do not have enough... time.... I will keep you all updated as I make progress on this truck.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
New XM221 Owner in Oklahoma
- Thread starter Duke113p
- Start date
pittdog
New member
- 165
- 0
- 0
- Location
- Black Creek , NC
Thats rare !!!!! get it done ,nice tactor !
pittdog
New member
- 165
- 0
- 0
- Location
- Black Creek , NC
I ment tractor
- 10,436
- 6,487
- 113
- Location
- Camp Wood/LC, TX
Looks like you got the Clark 5 speed from the CCKW. I would keep that. Otherwise looks like a great candidate for restoration. Work on it a little every day and one day it will be done.
- 1,177
- 47
- 48
- Location
- Jarrettsville, MD
Nice score! Congratulations!
wsucougarx
Well-known member
- 6,951
- 67
- 48
- Location
- Washington State
wow![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]")
- 4,298
- 3,126
- 113
- Location
- Fort Worth, Texas
Looks like she needs love, make sure you give it to her.
mikew
Member
- 454
- 8
- 18
- Location
- edmond, ok
I like it a lot!
Can't wait to see it moving under it's own power!
Can't wait to see it moving under it's own power!
hippiedude
Active member
- 1,175
- 4
- 38
- Location
- Granby , Ct.
Nice looking truck......A little time and effert and you will have a cool truck ....... Tim
- 5,580
- 349
- 83
- Location
- DESOTO, KANSAS
Wow have I got a case of tractor envy! Good luck on your project.
Mastertech
Member
- 55
- 0
- 6
- Location
- Puyallup WA.
To bad someone took out the Hydro and xchanged for the manual trans. probably dont have the Hi/Low option now but the tractors are cool Im hoping to add one of those to my garage that and a tipper and a tanker
thanks
Thanks everyone. I just relaized that the transmission and transfer case that is in it has a pretty nice PTO on the side off it. I will get some pictures of that and post later this weekend. There were two other parts vehicles that I have been taking all the parts off of them to have extras and replace a few bad components. I started at the engine compartment in earnest this past weekend. Seems that some rates or something big with sharp pointy teeth and a mean streak a mile long got to the replacement air hoses off the pump. The air pump is bad, replaced number five plug wire. I pulled all the spark plugs and number 5's insulator as it goes into the plug just fell apart. Of course I had to mess around in the rear... I worked on the fifth wheel, it now opens and closes. Does anyone out there know where to get replacement floor board covers that cover up those big holes for the body mounting holes? I have one, it looks as though the rubber is crumbling off of it. And last but not least... if anyone knows of someone or some place that has a front bumper... please let me know.. thanks.
Thanks everyone. I just relaized that the transmission and transfer case that is in it has a pretty nice PTO on the side off it. I will get some pictures of that and post later this weekend. There were two other parts vehicles that I have been taking all the parts off of them to have extras and replace a few bad components. I started at the engine compartment in earnest this past weekend. Seems that some rates or something big with sharp pointy teeth and a mean streak a mile long got to the replacement air hoses off the pump. The air pump is bad, replaced number five plug wire. I pulled all the spark plugs and number 5's insulator as it goes into the plug just fell apart. Of course I had to mess around in the rear... I worked on the fifth wheel, it now opens and closes. Does anyone out there know where to get replacement floor board covers that cover up those big holes for the body mounting holes? I have one, it looks as though the rubber is crumbling off of it. And last but not least... if anyone knows of someone or some place that has a front bumper... please let me know.. thanks.
hippiedude
Active member
- 1,175
- 4
- 38
- Location
- Granby , Ct.
I have a nice bumper with all three stone shields ..... Shipping would be a bear though ......... Tim
bratpackdad
New member
- 1,131
- 6
- 0
- Location
- Middle America
! Good eye you found a great project!
pwrwagonfire
New member
- 652
- 5
- 0
- Location
- Central Massachusetts
Hey man, welcome and congrats on a cool truck!
Looking foward to seeing your progress
Looking foward to seeing your progress