NHC-250 PT Pump return line

[Brutacus]

Does any one know what sizes and types the tube and fittings are on the return line that connects to the pt pump? This is on a M818, NHC-250 Cummins.
I was mounting my rebuilt pump and when I was tightening the return line, I never felt it get tight, or even snug. Then I notice the fitting was cracking. I just don't think the fitting will hold now. Sorry about the blurry pic, but the crack is visible in the middle of the fitting.

 

[simp5782]

Its inverted flare. You can swap it with hydraulic line. Remove the fitting from the block on the engine. Its inverted flare as well but you need the inverted flare 1/4" to #4 male jic. Jj performance llc on Elmore rd is the only place that will have it.

Pump end is also inverted flare. Pump side is 1/8" boss. Typical hydraulic swap is boss to #4 jic male. And a short hose

I've got everything on my table at home you need