Nhc250 ip vacuum/ fuel line rating

[TechnoWeenie]

Looking at replacing with rubberized line... Diesel rated..

From tank to filter, and filter to IP

The lines I'm looking at are gates 27006 which is rated at 35 psi and 10in/hg for vacuum and 1/2"

Couldn't find any spec on vacuum and didn't want to buy line just to find out it'll collapse under vacuum.

 

[SLOrazorsedge]

Subscribed. Looking to do the same thing on a M936A1 to eliminate possible gremlins in the fuel system...I was going to spec out green strip but won't rule out Gates.

 

[WillWagner]

Push on hose will be fine. There is no pressure in the lines and the only way the line will see any suction is if there is something in the tank that blocks the pick up

http://www.gates.com/products/autom...y-duty-fuel-system/submersible-fuel-line-hose

 

[TechnoWeenie]

The 27006 seems to be a low pressure evap/return line hose, but it's pretty well built, and it warns against using in pressurized fuel injected applications.

The hose you linked to is a different product...

Clarification?

 

[WillWagner]

No pressure in the system you want to re hose. It is fuel line.

Try this maybe....

http://www.daycoproducts.com/dayco®-fuel-line-hose

 

[TechnoWeenie]

No pressure in the system you want to re hose. It is fuel line.

Try this maybe....

http://www.daycoproducts.com/dayco®-fuel-line-hose

I'll stick with the Gates...

Dayco says

Note: Not suitable for gasoline/oil mixed fuels, alcohol blended fuels, or bio-diesel fuel.