• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

nitrogen canister in fire extingisher holder

CARNAC

The Envelope Please.
Supporting Vendor
8,281
649
113
Location
Corpus Christi, TX
No offense in this but I have to chuckle...

Everyone thinks it's a fire extinguisher mounting point. So many folks have never looked at the TM. Just have to chuckle.
 

Keith_J

Well-known member
3,657
1,319
113
Location
Schertz TX
That is for the DS2 operator decontamination sprayer. The thing LOOKS like a fire extinguisher but it is camouflaged, not red. DS2 will burn easily, especially if you spray it on dry STB (as if anyone has DS2 or STB ;-))

Why nitrogen? Because CO2 reacts with DS2. Why a cartridge? Because DS2 comes in 5 gallon cans. The decon units were only filled if expected to go into a possible area. It is used on the operator-contacted areas and only under MOPP level 4 which meant you didn't have to worry about it on the skin, the personal decon wipes are used for that.

These are much higher pressure than CO2. Be careful.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks