Tkhawk01
New member
- 3
- 0
- 0
- Location
- Longview, TX
No Lights(Solved)
A couple of nights ago all of my lights and other electronics controlled by the black out switch stopped working. They were working fine when I got out and then I got back in turned them on and nothing happened. I've downloaded and read the TM and studied the wiring diagram. The fuses are good. The BO switch input has 9V when the BO is off, but when it is flipped up the voltage drops to 0. I thought that there maybe a short somewhere sucking the voltage down so I pulled the switch off and jumped the orange wires with a current meter but there was no current flowing there. Is there a voltage regulator somewhere that I need to replace or do ya'll have any other ideas. Thanks, its is a 86 M1009
Terrence
A couple of nights ago all of my lights and other electronics controlled by the black out switch stopped working. They were working fine when I got out and then I got back in turned them on and nothing happened. I've downloaded and read the TM and studied the wiring diagram. The fuses are good. The BO switch input has 9V when the BO is off, but when it is flipped up the voltage drops to 0. I thought that there maybe a short somewhere sucking the voltage down so I pulled the switch off and jumped the orange wires with a current meter but there was no current flowing there. Is there a voltage regulator somewhere that I need to replace or do ya'll have any other ideas. Thanks, its is a 86 M1009
Terrence
Last edited: