Billy2642
Member
- 116
- 16
- 18
- Location
- Yakima, wa
bought a set of trailer mounted MEP-804B's with the Yanmar Turbo engine. First one only had 87 hours and once I put fresh fluids in it, started and runs great. Ended up selling it to a mobile BBQ food truck. The second set I'm having issues on. It only had 1000 hours on it. Put fresh fluids, batteries etc in it. Crank it with the dead crank and it will crank all day long no problem. Put dead crank in normal, pull emergency stop, depress fuse under panel. When I rotate the master switch to prime/run I hear the fuel pump like normal. Press to start and I just get a click from the relays under the panel and in the containment box. I tried leaving the master switch on prime/run and jump the starter and it cranks but won't run. I then had someone try to crank it from the master switch and don't hear the actuater on the injection pump. I hooked 24 volts directly to the actuater and jumped the starter and boom she fired right off. If I can figure out the no crank using the master switch, I'm thinking maybe the inj pump actuater issue may also be fixed. Anyone have this issue?