• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Noobie question about the GP resistors!

HillBilly

New member
21
0
0
Location
Bethany WV
Sry folks, But I have been searching for the Ohm value for the big resistors on the fire wall.
I thought I had seen it posted here somewhere B 4 Just can't seem to locate it again!

I have mine out of the truck and tested it @ ~.2 to .5 Ohms (sry cheap meter). The wires were cut on both sides of the resistors when I picked it, the batts were shot, and both gens had to be rebuilt. I picked up two batts recently and would like to workout the gremlins B 4 I fry somthin gettin all premature! Money is tight N' all that so experimenting is not an option.

I can take pics if you all need to see, just tell me what to point at.
Any advice would B much appreciated!
Thanks HB
 

HillBilly

New member
21
0
0
Location
Bethany WV
I feel your pain! Either there mechanic doesn't know a wire from his wanger! :lol:
Or they do a lot of field repair wack N' hack style!
 
Top