Orientation of center hood / radiator seal

[mgFray]

I'm in the process for building a "new" hood. While looking at the parts manual (figure 203) item 16, compared to my old hood the orientation on my old hood is backwards from how it's shown in the diagram.

Can someone take a picture and show me how your radiator seal is mounted to the hood? Specifically what I'm trying to figure out is does the rubber L shape are the bolt heads visible from the grill side, or the top of the hood side?

The diagram looks to me like the bolts should be visible from the "top" of the hood side, but mine is opposite.

Thanks!

 

[Mogman]

Pictures would realy help

 

[mgFray]

Pictures would realy help

Yup, thats why I asked if people have any pictures of the seal. (I unfortunately don't, I'll take some in the morning when it's light out.). But it's the orientation of #16 below.

 

[Mogman]

If someone else does not chime in I will look in the am, but I do not understand the bolts question, as per the TM none of them should be visible from the "top" of the hood, it mounts to captured nuts from underneath, #15

 

[Maxjeep1]

This is how mine is installed

 

[mgFray]

This is how mine is installed View attachment 878257

(looking under the hood) Yours are visible from the 'grill side'.. That is the same orientation that my existing hood had -- which is opposite of the manual. I'm thinking the manual itself is wrong. Thanks, this makes me think I did it right.