• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Our BRDM2 chemical recon vehicle

kcimb

Well-known member
1,335
212
63
Location
Fort Worth, Texas
Purchased (New) from International Repot Depot in 2016, delivered in 2017.



Getting cleaned!








Interior. After 4 years of bouncing in and out it was in need of a good blast of hot water.






After, much cleaner ! Almost parade ready except for tnose nasty tires.







All done!





I have a title and tags being sent to me from Vermont. I went the Dirt Legal way since our local DMV was shut down due to the COVID stuff going on. It was pricey but I wanted to have it running sooner, not later.

This is my second BRDM. My first one was bought from Indiana from our very own augdog1964 and sold to a guy in Kansas who then sold it to another guy who is bringing it back to Texas.

Mine is more or less how they come off the factory floor. It's in immaculate condition. There's a bunch of little things that need to be fixed from the vehicle sitting for so long. Bulbs, lights, indicators, seals, etc. But the primary things we are fixing soon before the road test are:

Tires-I have 4 new tires here that need to be put on.
Brakes-test.
Trans-change oil.
Turn signals and brake lights-replace bulbs/change to LED
Engine-change oil again.

Minor stuff-
Wire brush/ prime paint rear cargo compartment
Complete PKT kit and shoot
DRIVE
Send off to Petronics for rewire

I normally start and run it 2 times a month. It always starts fairly quickly.
 

kcimb

Well-known member
1,335
212
63
Location
Fort Worth, Texas
A rather disappointing day working on the BRDM.

Hooked up the PKT solenoid and the firing circuit works.

I changed the transmission oil. It was very low and nasty. Flushed it with 2 gallons of extra 90w I had then poured in 8ish liters of ep90.






The PTO is the fill hole for the entire trans.


Shifts much smoother now and the synchros are actually functioning well and it hits second gear without any problems! Ya.

While driving it with m35ben as the spotter it started making weird noises.

PTO was spinning the winch. Not sure if it’s supposed to spin. F.

Then it died. I know it’s not broken, it’s a Good running vehicle. It’s probably out of gas.



10 gallons of USA’s finest Dino juice dumped in the tank and it fires right up. M35ben noticed it’s leaking coolant all over the battery and right side of the engine bay.

F.

So we power it back to the stall and change the front right tire with a new one and contemplate the meaning of 40 year old rubber failing.



 

M813rc

Well-known member
Steel Soldiers Supporter
4,207
3,191
113
Location
Near Austin, Texas
Looking good!

If that is the same one I sat in some years ago while visiting Earl, it is a really nice vehicle.

Cheers
 

kcimb

Well-known member
1,335
212
63
Location
Fort Worth, Texas
Looking good!

If that is the same one I sat in some years ago while visiting Earl, it is a really nice vehicle.

Cheers
yep, that’s it! It’s in remarkable shape. All those 40 year old seals and plastic and rubber are just failing now so I need to keep on the ball inregards to maintaining it. We are planning on hitting the road this winter.
 

kcimb

Well-known member
1,335
212
63
Location
Fort Worth, Texas
Shakedown cruise coming this Saturday. Plates applied, getting insurance this week. Fixed the coolant leak. There might be some dribbles here and there but nothing major.

Replacing 3 tires, adjusting the brakes, and using a chase car but we are hitting the road.
 

kcimb

Well-known member
1,335
212
63
Location
Fort Worth, Texas
We were able to hit the road today.

It drew quite the crowd. Unfortunately, had issues.

Brake seized shut
Carb is surging.
Hydraulic fluid blew out

It runs and drives like a DREAM. It’s quick. Well, until the hydro blew and the brake seized shut and the carb started surging.

Minor issues to fix.

Armor draws a crowd.












 

kcimb

Well-known member
1,335
212
63
Location
Fort Worth, Texas
I am still trying to convince my wife we need one of these. I look at them online in Europe quite often. Maybe I can find a trader for my hmmwv...lol
They're awesome. We haven't been able to drive much because of various things wrong-brakes, wasn't shifting, clutch, leak, etc. But one weekend a month has only ONE issue left-brakes are locked up. M35BEN is a solid AF mechanic and knows these things inside and out, way better than me.
 

kcimb

Well-known member
1,335
212
63
Location
Fort Worth, Texas
From my research so far:

List of all known BRDM2 vehicles in private hands in the USA

1-DFW area, Texas - polish chemical detector variant small turret RKHB running condition, missing many pieces on the inside. Owner is known



2.DFW area, Texas -Czech chemical detector, small turret, I am the owner. Running condition as it left the military in almost new shape



3.DFW area, Texas - Iraqi big turret recon variant. Running but in rough shape. Know the owner (my old one). Owner is known



4.DFW area, Texas - Bulgarian chemical detector variant, not running, seized engine. Owner is known



5.Florala, Alabama-Iraqi big turret model, missing engine and transmission. Very rough shape. Needs total
Restoration. Demil cuts. Only known through intermediary David Uhrig.



6-7 Seattle, Washington 2 ATGM missile
Carrier vehicles-status unknown, running and driving. Possibly @Malyutkaman ?

8. New York- big turret command variant BRDM2, excellent condition, running and driving. Owner is known.



9.Ohio-Iraqi ATGM missile carrier, restored, unknown status, sold in 2009 from a museum. Owner is not known





10. Military museum
Of Vermont- sagger ATGM carrier. Rough shape. Owner is known



11. Mass, unknown chemical variant-no other details, owner not known

12. ATGM carrier, blue ridge, GA tank town USA







I will continue to update this as I find out more.
 

Malyutkaman

Member
48
1
8
Location
Des Moines, WA
Great listing of other BRDM's(y) Nice to see that there are more in the US than I thought. With more in country, maybe I can start to find a few of my desperately needed parts for the missile system and vehicle. BTW... last year I bought 7 sagger missiles from Bowman Co. in Florida... COOL ACCESSORY:naner:
 

FrankenCub

Active member
296
29
28
Location
Broome Co., NY
From my research so far:

List of all known BRDM2 vehicles in private hands in the USA

1-DFW area, Texas - polish chemical detector variant small turret RKHB running condition, missing many pieces on the inside. Owner is known



2.DFW area, Texas -Czech chemical detector, small turret, I am the owner. Running condition as it left the military in almost new shape



3.DFW area, Texas - Iraqi big turret recon variant. Running but in rough shape. Know the owner (my old one). Owner is known



4.DFW area, Texas - Bulgarian chemical detector variant, not running, seized engine. Owner is known



5.Florala, Alabama-Iraqi big turret model, missing engine and transmission. Very rough shape. Needs total
Restoration. Demil cuts. Only known through intermediary David Uhrig.



6-7 Seattle, Washington 2 ATGM missile
Carrier vehicles-status unknown, running and driving. Possibly @Malyutkaman ?

8. New York- big turret command variant BRDM2, excellent condition, running and driving. Owner is known.



9.Ohio-Iraqi ATGM missile carrier, restored, unknown status, sold in 2009 from a museum. Owner is not known





10. Military museum
Of Vermont- sagger ATGM carrier. Rough shape. Owner is known



11. Mass, unknown chemical variant-no other details, owner not known

12. ATGM carrier, blue ridge, GA tank town USA







I will continue to update this as I find out more.
I drive by #8 every day, awesome looking vehicle. One day when I have time I may stop to check it out closer.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks