closedknuckle
New member
- 21
- 0
- 0
- Location
- Neenah/Wi
Where is the best place to buy P O R?
Thanks
Thanks
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
P o r
- Thread starter closedknuckle
- Start date
TACTICAL6
Member
- 379
- 1
- 18
- Location
- Newark, Ohio
I buy it from POR15.com but you can also get it off ebay. Great stuff, I use it all the time.
98hd
Member
- 552
- 1
- 18
- Location
- Reedsburg, WI / Trenary, MI
I like to use zero rust. And there prepstep is awesome to protect bare metal.
jeeper50
New member
- 15
- 0
- 0
- Location
- Newnan, Ga.
Used Zero rust on my frame kinda thick but it works good.
I haven't used the other stuff, but my experience with POR is awesome! Need to make sure you have a good prep- meaning a bit rough- for it to bite to. ROUGH sandpaper, not just a little hit with 220. Sandblasted or lightly surface rusted metal is perfect. Once it goes on, it STAYS! Once hard, you'll have a hard time making a mark in it with even sandpaper.
Had it on the floor of a Jeep once...no carpet, and it was a trail rig, so lots of dirty/muddy feet on it, and it never wore off.
I use the direct site, por15.com or else a local automotive swap meet to save on shipping.
Jim
Had it on the floor of a Jeep once...no carpet, and it was a trail rig, so lots of dirty/muddy feet on it, and it never wore off.
I use the direct site, por15.com or else a local automotive swap meet to save on shipping.
Jim