PDP power tap thread size?

[Blairg]

Trying to figure out the thread size on the PDP to tap onto the 12v and negative circuits for aux power. Negative appears to be m6-1.0 . It looks like the 12v tap is larger maybe M8-1.0 but I am unable to start my thread checker set to verify. IS it a different pitch or has somebody narffed up the threads?

Thanks,
Blair

 

[Awesomeness]

In an A0 they are not metric.

 

[coachgeo]

swear saw this somewhere.... hmm..... let me look

OK.. looks like it is in the parts spread sheet which is a stuck/pinned thread at the top of this page. It is under the electrical section

 

[Blairg]

Thank you. I know realize what I was looking at when I saw that in the spreed sheet. picked up hardware while I was in town today.

Blair

 

[Blairg]

Thought I would add the sizes for people who search the forum. 12v and 24v pdp thread size is 5/16 -18 Ground is 1/4-20

Blair