Pic request

[bear76]

Could someone please post a pic of a CUCV fuse panel?

Thanks.

 

[CCATLETT1984]

the TM shows a good diagram of it.

http://www.steelsoldiers.com/index.php?module=pagesetter&type=file&func=get&tid=1&fid=file&pid=10
this is the link to the -34 manual (direct support)

http://www.steelsoldiers.com/index.php?module=pagesetter&type=file&func=get&tid=1&fid=file&pid=8
this is the link to the -20 manual (unit support)

both are pdf files (each is a few Mb's)

 

[CUCVFAN]

From an eBay auction of a newer manufacture harness (1993?), so it may not be exactly the same as the original (I didn't check). But it's probably close.

 

[CCATLETT1984]

the -34 has the schematics near the end of it. shows several shots of it and also shows the rest of the wiring diagrams. Are you trying to troubleshoot something?

 

[bear76]

I just finished rewiring the engine. Now I'm tring to get it to turn over. Most of the lettering on the fuse panel has been rubed away and I wanted to make sure all right fuses were in there.

My next step is to drop the steering wheel and start tracing the wires back to find out whats not working. Might be awhile due to the cold thats moved in to the area.

 

[gt1009]

good luck, just got to be 10 degrees here, so the planned air horn project is put on hold till next summer

 

[cobra]

yea its -3c outside so, good luck, if you can do it do it, if not well, happy waiting lol