Jon Walker
Member
- 31
- 1
- 6
- Location
- Cedar City, Utah
My truck runs perfect on a full tank of fuel. After I run through about 4 gallons of fuel I occasionally begin to get air in the fuel line. At half a tank I can drive 30 seconds at fuel throttle and then air gets in the line and it looses throttle until more fuel gets into the line. At 1/4 tank it isn't drive able.
I pulled the tank from the truck and removed the 90 degree pickup elbow. Is there supposed to be a way to remove an actual tube that goes into the tank? It looks like the nut the elbow was attached to is welded into the tank. How can I remove the pickup tube from the tank?
I read the TM's and can't find anything about removing the tube from the tank.
I pulled the tank from the truck and removed the 90 degree pickup elbow. Is there supposed to be a way to remove an actual tube that goes into the tank? It looks like the nut the elbow was attached to is welded into the tank. How can I remove the pickup tube from the tank?
I read the TM's and can't find anything about removing the tube from the tank.