• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Power Steering Unit Rebuild ? Who done it ??

Amxhunter

New member
119
0
0
Location
Mobile, Alabama
Doing the PS add on a Deuce. PS unit seemed to start off OK, but the pump has exhibited very low pressure now.


Anyone with some helpful hints ? How to rebuild or ???

Posted over in the 5 ton section also because it's a 5 ton MF pump.
 

m-35tom

Well-known member
Supporting Vendor
3,021
222
63
Location
eldersburg maryland
the 5 ton pump has 3 lines. the smallest one is a 'vent' line but it must be well below the top of the fluid or it will get air and cause several problems. i reccomend just plugging it at the pump as it is redundant. it is tied internaly to the suction line.

tom
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks