Pto hydraulic pump

[AlexS]

My hydraulic pump bit the dust today on my fmtv dump truck. Does anyone know a PN or alternative for the hydraulic pump. The number I got off it is C35.5l 33364 sauer sundstrand. Also if anyone knows where to source a filter for the wet kit that would be appreciated. PN 931558. It’s a A0 m1094. I’ve looked all round the forum but no luck. Would a hydraulic pump from a winch equipped truck be the same? Thanks everyone once again.

 

[Skyhawk13205]

B5501-33364 for the pump, best I could find on the -24p manual. What happened to your pump?

 

[AlexS]

B5501-33364 for the pump, best I could find on the -24p manual. What happened to your pump?

Started making metal bits. Took the pump apart itself just to make sure, and sadly I was correct.

 

[Skyhawk13205]

Looked up the pump for the winch truck, it is the same PN so I think all the hyd pumps off the pto should be the same.

 

[Ronmar]

You might also be able to approach this from another direction. Look up the PTO drive gearbox P/N, and the manufacturer should have specs for type pumps or output interface it is compatible with…

 

[Skyhawk13205]

You might also be able to approach this from another direction. Look up the PTO drive gearbox P/N, and the manufacturer should have specs for type pumps or output interface it is compatible with…

It look like the PTO PN is 276XMFJX-D5XK per -24 LMTV TM, I could not find a parts desc for the 276 all I could find was for the 277. Most of the numbers line up. It gives an output type of a 2 or 4 bolt sae b whatever than means, I don’t know if the spline is the same pitch or diameter. See attached for PN desc