Greetings all,
I've decided to go with spray cans (CARC substitute) from RAPCO for my M1009.
I'm at the point of ordering the paint. I've read on here it takes about 17 cans do to a CUCV, and I'm going to order 24 cans (given the special price) from RAPCO to do it.
However, while I have the schematics of the NATO 3-tone pattern, it doesn't necessarily say just how much (in percentage) is used in the pattern for an M1009.
Mark at RAPCO suggested 25% black, 25% brown, and 50% green. However, it seems to me there is significantly more black in the pattern, and very little if at all brown.
My father, an owner of a 1951 M37 said he thought he had read that the pattern ratio was 45:45:10 (green, black, brown). That sounds a little more accurate, but I thought I'd check with you all and see if anyone knows for sure.
I'm doing the "final revision" NATO 3-tone.
Thanks,
-maetl
I've decided to go with spray cans (CARC substitute) from RAPCO for my M1009.
I'm at the point of ordering the paint. I've read on here it takes about 17 cans do to a CUCV, and I'm going to order 24 cans (given the special price) from RAPCO to do it.
However, while I have the schematics of the NATO 3-tone pattern, it doesn't necessarily say just how much (in percentage) is used in the pattern for an M1009.
Mark at RAPCO suggested 25% black, 25% brown, and 50% green. However, it seems to me there is significantly more black in the pattern, and very little if at all brown.
My father, an owner of a 1951 M37 said he thought he had read that the pattern ratio was 45:45:10 (green, black, brown). That sounds a little more accurate, but I thought I'd check with you all and see if anyone knows for sure.
I'm doing the "final revision" NATO 3-tone.
Thanks,
-maetl