123mack
Member
- 861
- 11
- 18
- Location
- Jemison, AL
Before using the starting aid on my M816, I decided to inspect the system for loose connections, etc. As part of the inspection I pulled the glow plug and the element was burnt in two. Thinking it may hav been subject to excessive voltage, I checked the power at the resistor. 12v into the resistor, and 11.9 v out. Anyone ever see this happen? From my experience, when a wire type resistor goes bad, it usually fails to an open condition. What ohms should it read? Anyway I'll probably be needing a replacement.