Anybody have a schematic for adding a reverse light to a M923? I want the light to come on in Reverse only (vs having it on a switch in the cab). Can we use the pressure port on the side of the tranny and wire power to the light that is only switched on when the case pressure inside the tranny (in Reverse) trips the pressure switch? Thx for any help you can provide!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Reverse lights
- Thread starter Dhjmd
- Start date
- 2,657
- 2,184
- 113
- Location
- Sunman Indiana
I still haven't figured out how to make a link using Tapatalk.
Search for tread "M939 5-Ton reverse light switch" by Superman
Search for tread "M939 5-Ton reverse light switch" by Superman
- 5,611
- 2,916
- 113
- Location
- Metairie/La (N'awlins)
Yes, It is easy.
Check my truck build under "major Zippidy" as I documented and also added a back up alarm at the same time. Pretty straight forward.
Check my truck build under "major Zippidy" as I documented and also added a back up alarm at the same time. Pretty straight forward.